7 Amazing DIY Methods To Purify Water At Home

Water is the most basic household resource; It is usually referred as a universal solvent due to its necessity in almost everything from household cleaning to hydration, cooking to even irrigation of crops. Though industrial development is essential, it has one disadvantage of contaminating water this proves very costly since pure cleaning water will be scarce.

Clean water

To fight this situation, you need to take responsibility on your own hands and purify your water rather than trusting the water company to do all the job in purifying it. Now, are you wondering how to purify the water before drinking? If yes then read through the following lines to know the best way for the same. They include;

1. BOILING

The best and fastest way to purify water would be to boil it. To boil water take a clean container and pour water in it set it out on top of the heat source to boil it cover it to allow pressure build up so that it takes a short time to boil and saves fuel. Once the water has boiled turn of the source of heat and allow it to cool. Boiling kills disease-causing microorganisms present in the water and is also used to make hard water soft.

2. USING HOUSEHOLD CHLORINE

Chlorine can remove microorganism and remove water hardness. To use chlorine one requires to clean the container which would store the water using dishwashing soap and water. Using an eye dropper and liquid chlorine solution rate 8drops per gallon and allow the water to settle for 30min using the double amount of chlorine would make the water cloudy.

3. USING TINCTURE OF IODINE

Purifying water with iodine is found to be an effective way. For this, add 2% tincture of Iodine in the water, i.e. 20 drops per gallon of water. Add 40 drops, if the water is cloudy. Stir the solution and allow it to stand for about 30 minutes.

4. SOLAR WATER PURIFICATION

Solar energy is beneficial in water in purifying water. This is quite simple you need to pour the water into clear PET bottles and allow solar exposure for about 6 hours. Solar purification makes the use of ultraviolet light in the deletion of microorganism.

5. USING GRANULAR CALCIUM HYPOCHLORITE(LIME)

The sediment filter uses calcium hypochlorite to filter water. To use this method dissolve calcium hypochlorite a spoonful per two gallons of water stir the solution thoroughly to make a disinfecting solution now add a drop of this solution in a gallon of water and leave it for 30 min.

6. USING ULTRA FILTERS

Though they may be expensive, another good and effective way of purifying water is the use of ultrafilters which is useful in removing all the sediment and can make the water clear. Soon ultrafilters will be available in most households as the technology is introduced.

7. SLOW SAND FILTRATION

Sand filtration is a beneficial procedure, consisting of simplest terms they use different layers of sand that remove suspended solids in water. What sets these filters apart is that they work by not only using the sand itself but rather a complex gel-like film that is naturally occurring on the sand surface

Leave a Reply

Your email address will not be published. Required fields are marked *